Cozy Search
Chapter Selection
- Chapters (52)
- Completed: (43)
- 00. Preparation (12)
- 01. Description & Introduction (1)
- 02. Bill of Materials (2)
- 03. Education (4)
- 04. Fuselage Bulkheads (5)
- 05. Fuselage Sides (5)
- 06. Fuselage Assembly (2)
- 07. Fuselage Exterior (1)
- 11. Elevators (1)
- 12. Canard Installation (1)
- 13. Nose, Nose Gear & Brakes (7)
- 14. Center Section Spar (4)
- 16. Control System (1)
- 19. Wings, Ailerons & Wing Attach (4)
- In Progress: (11)
- Not Started: (1)
- 22. Electrical (1)
- 25. Finishing (1)
- 26. Upholstery (1)
- Completed: (43)
- Uncategorized (7)
- Chapters (52)
Archives
- March 2018
- May 2017
- January 2017
- February 2016
- January 2016
- April 2015
- August 2014
- January 2014
- October 2013
- July 2013
- February 2013
- December 2012
- October 2012
- June 2012
- May 2012
- April 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- July 2011
- June 2011
- May 2011
- April 2011
- March 2011
- February 2011
- January 2011
- December 2010
- November 2010
Meta
-
Join 93 other subscribers
Chad Wilhelm’s Cozy Build
Monthly Archives: November 2011
32.5 Hrs – Chapter 13 – Nose Gear
Carved the pivot blocks and floxed into place, holding with nails. Cut the 2024 T3 Aluminum on the band saw and drilled the 1/4″ hole . Verified with Dennis that this hole gets AN3 hardware, and not AN4 bolts, like … Continue reading
Posted in 13. Nose, Nose Gear & Brakes
Leave a comment
.jpg)
TARMAC GRAZER 