Category Archives: 03. Education

Chapter 03 – 5.25 Hrs – Practice Layup #3

I started by cutting the foam to dimension.  (Note that the 2″ foam is 7″ x 7″, not 7″ x 9″, as the plans could mistakenly be read as).  Started the first layup by nailing the two pieces together, and … Continue reading

Posted in 03. Education, Completed: | Leave a comment

Chapter 03 – 4 Hrs – Practice Layup #2

I was not able to find 1/2″ PVC foam in my supply, but I did have 3/8″ PVC, so I used that in it’s place.  I cut the piece to size with a utility knife after marking the top for … Continue reading

Posted in 03. Education, Completed:, Uncategorized | Leave a comment

Chapter 03 – 2 Hrs – Practice Layup #1

Started by taping some wax paper to the table, and then added epoxy to the first layer of BID (Bi-directional) fiberglass cloth.  Wetted it out, stippling out any air bubbles with a 2″ paint brush.  Repeated the process for a … Continue reading

Posted in 03. Education, Completed: | Leave a comment

Chapter In Progress

Posted in 00. Preparation, 03. Education | Leave a comment