Monthly Archives: July 2011

Chapter 5 – 32 hours – Fuselage Sides

Cut out wood pieces for the Jigs.  The plans say two 8 foot boards, but actually you need three (or four, if you screw up any of the pieces…) Cut out the rest of the jig pieces, and mounted to … Continue reading

Posted in 05. Fuselage Sides | Leave a comment

Chapter 4 – 6 hrs – Bulkheads

Completed the aft side of the firewall.  Cut out the hard points at 2″ square, and floxed into place.  (The plans say 1″ square, but builders have been reporting troubles aligning the engine mount, and making the engine mounts closer … Continue reading

Posted in 04. Fuselage Bulkheads | Leave a comment